This short article is purely informational. It is hoped that it will be a resourceful contribution for those readers who are dealing with extremely high levels of excess fatty tissue levels at this time. It is also hoped that these readers will have made the necessary inroads towards healthy remedial action by consulting with their general practitioners and, later, medical specialists. Among these specialists could be the lipo-laser treatment specialist. His or her lipo laser machines generate diodes. This is done by the laser.
These diode emissions will be controlled at certain wavelengths. These will be from short to long wavelength and low energy to high energy levels as the process of excess fatty tissue removal dictates. The quality of today’s lipo laser machines are determined by the amount of diodes they are able to produce. The diode production and emission is necessary in order to generate heat. It is this heat that will ultimately be removing the excess fat from the designated areas of the body. This is done effectively by way of the abovementioned wavelengths and energy production levels.
Diodes generate the emissions at different wavelengths. This is what the lipo laser machine must depend on for producing the maximum amount of energy. The number of diodes created is defined as ‘fluence’. This fluence also determines brightness and how much of the body can be accessed strategically. All lipolaser machines are made up of pads. These pads are also known as paddles. The number of these on any one machine range from as little as four to as many as twenty four. Paddle sizes differ as well.
The smallest paddle will be six by four inches while larger paddles can be as much as twenty eight by twelve inches in diameter. The patient’s body is strapped to the machine with these paddles which are built for the patient’s comfort. These straps are generally made from elastic or Velcro. And the number of diode emissions from each paddle also varies. The lowest emission produces wavelengths of 660 to 670 nanometers. A second generation of diode emissions pulls back to 650 to 660 nanometer wavelengths.
The latest generation of emissions operates at between 635 to 640 nanometers. It is said that the younger the generation, the stronger its power. It therefore goes without saying that suitably qualified and experienced technicians and therapists prefer the latest range of lipo laser tools because of its more powerful diode emission capabilities. This has to be seen in light of present day circumstances where more men and women are coming forward and being diagnosed with morbid obesity and are offered the opportunity to enter into non-invasive remedial treatments that go to the heart of the matter in removing the excess fatty tissue. It is also argued that these excess fatty acids cannot be removed from the body purely by exercise and correct dieting. Non-invasive therapy is also safer than surgery.